Getting started with the Raspberry Pi RP2350 MCU A Powerful New Microcontroller with Dual-ISA Support This article will get you started with the RP2350. Raspberry…
Having your new LTE based Challenger/Connectivity board connect to the LTE network can sometimes be a bit challenging. While the 1nce sim card, most of…
Introduction The OpenDec02 decoder introduces a system wherein a defined set of GPIO (General Purpose Input/Output) pins of the MCU (Micro Controller Unit) can be…
Introduction Congratulations on acquiring the OpenDec02 DCC decoder! You’ve just taken a significant step towards revolutionizing your model train setup with one of the most…
As Internet of Things (IoT) projects become more complex and interconnected, utilizing versatile development boards and potent libraries is of the essence. The Challenger RP2040…
The digital age has ushered in an era of connectivity, with devices from every corner of our homes and industries now capable of communicating with…
Flashing new firmware to onboard ESP8285/ESP32-C3/ESP32-C6 devices. Update 2024-10-06 These instruction also applies to our RP2350 boards. Introduction The Challenger RP2040 series boards that have…
Prerequisites To get started with programming your new Challenger RP2040 board using the Arduino IDE, you will need the following items: Installing the RP2040 board…
The Challenger RP2040 NFC board is an Adafruit Feather sized microcontroller board based on the RP2040 micro controller from the Raspberry Pi foundation combined with…
RunCPM on the Challenger RP2040 SD/RTC RunCPM is a command-line tool that allows you to run vintage CP/M programs on modern embedded computers. RunCPM is…