2.4GHz flexible WiFi/BLE antenna with IPEX3 connector
This antenna is perfect for use together with our Challenger+ RP2350 WiFi/BLE board. It is a 42mm by 12mm flex PCB antenna with double sided tape on the backside making it perfect for mounting inside of an enclosure. It has been designed specifically to be attached to a plastic wall of around 1.5mm’s to 2.0mm’s thickness. In open air it does not perform as well as when it has been mounted properly.
Specification
Return loss diagram of antenna mounted on a 2mm thick 15cm x 10cm poly carbonate sheet.
Smith Diagram
| Parameter | Specification |
|---|---|
| Center Frequency | 2450 MHz |
| Bandwidth | >130 MHz |
| Antenna Gain | 5dBi |
| Impedance | 50R |
Reviews
There are no reviews yet.